Description
With the Light-Up Disco Dance Pole, you can turn your bedroom or living room into your own private dance stage. You’re the star, and your room is the stage where you may live out your wildest dance pole fantasies! You may conduct personal, one-on-one private striptease sessions for you and your beloved in the comfort of your own home with the Disco Dance Pole set up. The remote-controlled flashing LED lights set the tone for a dirty-dancing disco show! 4 Screws 4 Washers Chrome-Plated Dance Pole Mounting Bracket Control through remote Satin Love Mask for Free *Remote control requires 1 “12V” battery (not included) (Included) INSTRUCTIONS FOR ASSEMBLY: The heavy-duty stainless steel pole is simple to assemble and takes only minutes to complete. A ladder, a power drill or screwdriver, and a stud finder are the only instruments required for installation. The Fantasy Dance Pole is a strong bolt-in mount that can be installed in practically any flat ceiling. The use of vaulted ceilings, acoustic ceilings, and fake ceilings is not advised. To ensure sturdiness and safety, verify the durability of both the floor and the ceiling prior to installation. If you are unsure about installing the pole yourself, hire a trained handyman to make sure it is done correctly.
1st Figure
Using a stud finder, locate a ceiling joist on your flat ceiling before you begin. Place the ceiling mounting plate on the ceiling and screw in the (4) provided screws once you’ve found the ceiling joist. Before drilling the screws into the ceiling to fasten the mounting plate, make sure the washers are on the screws.
Figure 2 Twist the steel tubes together until they are snug, then attach the long pole to the short pole. Ensure that the grey rubber slider is on the pole closest to the ceiling and that the rubber stopper is pointing down. The pole length can be adjusted from 7’3” to 9’3”, so make sure you measure your ceiling first.
Figure 3 Raise the pole to the mounting plate on the ceiling and insert it into the coupling plate’s aperture. Twist the pole in a clockwise direction until it latches into the ceiling mounting plate. The built-in spring inside the extendable pole can now be used to modify the height of the pole.
Figure 4: Twist the pole clockwise until the non-skid rubber stopper is firmly in place. The length of the pole extends with each clockwise twist, making it tighter and more stable with each twist. When you can no longer twist the pole, it’s time to put it to the test. Before using the pole, make sure it’s perpendicular to the ceiling and that it’s tight and stable. You’re ready to try it out once you’re certain the pole is correctly attached. Now you can get a wonderful cardio workout while practicing the same attractive dancing movements in the privacy of your own home. Your partner will be astounded and excited by how simple it is to tease and delight like an expert. Give it a spin and let your fetish dreams run wild!
There are no reviews yet.